Tubing for chromatography
High pressure fittings

• Nanovolume
• Stainless steel
• Polymeric

Low pressure fittings
Filters & mobile phase filters
Mobile phase handling systems
Frits
PEEK columns & guard columns
Sample loops
Accessories/miscellaneous

About VICI Jour
Contact VICI AG International
Order a VICI Jour catalog
Find a VICI Jour distributor
Technical info
Physical data
Main VICI site

ETFE Tubing

Ideal for applications with chloride salts
Higher burst pressure than PTFE

ETFE (EthylTriFluoroEthylene) tubing has some outstanding properties which make it particularly suitable for HPLC. It has a higher burst pressure than PTFE; 0.25 mm ID x 1/16" OD tubing will withstand up to 186 bar (2700 psi) using water as mobile phase. However, when ETFE is used with organic solvents it may swell, reducing the max. pressure to 70 bar (1000 psi). It is the ideal polymer for applications with chloride salts, which typically corrode stainless steel.

Further Reference

Clean-Cut tubing cutter

Tolerances:
1/16" OD: ± 0.05 mm (.002"), OD and ID;
1/8" OD: ± 0.10 mm (.004") OD and ID

OD	ID (mm)	bar*	psi*	Qty/pkg	Product No.
1/32"	0.25	152	2200	3 m	JR-T-084-M3
				10 m	JR-T-084-M10
				25 m	JR-T-084-M25
1/16"	0.17	200	2900	3 m	JR-T-078-M3
				10 m	JR-T-078-M10
				25 m	JR-T-078-M25
	0.25	186	2700	3 m	JR-T-080-M3
				10 m	JR-T-080-M10
				25 m	JR-T-080-M25
	0.50	152	2200	3 m	JR-T-082-M3
				10 m	JR-T-082-M10
				25 m	JR-T-082-M25
	0.75	117	1700	3 m	JR-T-083-M3
				10 m	JR-T-083-M10
				25 m	JR-T-083-M25
	1.00	83	1200	3 m	JR-T-085-M3
				10 m	JR-T-085-M10
				25 m	JR-T-085-M25
1/8"	1.59	110	1600	3 m	JR-T-086-M3
				10 m	JR-T-086-M10
				25 m	JR-T-086-M25

Home | Products | Search | Contact VICI Jour | About VICI Jour