- Fits all bottles or canisters with B83 thread
- Prevent evaporation of volatile compounds
- 5 ports
- 1/2-20 port for 1/4" OD tubing available
- Port for angled, barbed adapter available
B83 caps seal the bottle/cansiter with an O-ring behind a PTFE lip, so the O-ring is therefore not a wetted part. Three ports can fit 1/8" and 1/16" OD tubing, while one port is suitable for 1/4" OD tubing. Unused ports should be closed with plugs.
A bottom-sealing barbed adapter to connect 4, 6, or 8 mm ID tubing can be ordered separately.
Includes:
- 1 cap
- 1 O-ring
- 1 set: 1/16" nut/ferrule/color-sleeve adapter
- 1 set: 1/4" nut/ferrule
- 3 sets: 1/8" nut/ferrule/color-sleeve adapter
- 1 plug, 1/4" (1/2-20), where noted in product number chart
B83 Waste cap
| No. of ports | Includes | Product No. |
|---|---|---|
| 5 | 1/4" plug | JR-S-18304 |
| Thread for barbed adapter | JR-S-18314 |
Spare parts
| Description | Qty/ pkg |
Product No. | ||
|---|---|---|---|---|
| Barbed adapter, 1/2-20 thread | PA | For 4 mm ID tubing | 1 | JR-S-40104 |
| For 6 mm ID tubing | 1 | JR-S-40106 | ||
| For 8 mm ID tubing | 1 | JR-S-40108 | ||
| 1/4-28 flangeless nuts | PPS | For 1/16" OD tubing | 10 | JR-55070-10 |
| For 1/8" OD tubing | 10 | JR-55071-10 | ||
| Inverted ferrules | ETFE | For 1/16" OD tubing | 10 | JR-041-10 |
| For 1/8" OD tubing | 10 | JR-051-10 | ||
| 1/4-28 plug | PEEK | 
|
1 | JR-409 |
| PP | 
|
1 | JR-201999 | |
| 1/2-20 nut | POM | For 1/4" OD tubing | 1 | JR-CFL-4D |
| Collapsible ferrule | CTFE | For 1/4" OD tubing | 1 | JR-CFL-CB4KF-S |
| 1/2-20 plug | PTFE | 1 | JR-S-400007 | |
| Barbed hose adapter, 1/8" ID tubing |
PA/PP | 
|
1 | JR-075013 |
| Color-Sleeve adapters, 12 colors (2 each) |
PP | 
|
24 | JR-5808X-24 |
