Tubing for chromatography
High pressure fittings

• Nanovolume
• Stainless steel
• Polymeric

Low pressure fittings
Filters & mobile phase filters
Mobile phase handling systems
Frits
PEEK columns & guard columns
Sample loops
Accessories/miscellaneous

About VICI Jour
Contact VICI AG International
Order a VICI Jour catalog
Find a VICI Jour distributor
Technical info
Physical data
Main VICI site

Stainless Steel Frits – PEEK-Encased

For HPLC columns or in-line filters
Eliminate poorly swept volume and improves peak symmetry
Various porosities and dimensions available

VICI Jour PEEK encased frits with 1/4" ring OD are intended for HPLC columns with ID's of 3.2, 3.9, and 4.6 mm. By surrounding the frit with a PEEK ring, the diameter of actual porous surface is reduced to match the column ID. The compressed PEEK ring forms a seal between the bottom of the fitting and the column end, preventing the mobile phase and the sample from entering the otherwise accessible poorly swept areas.

Note
Stated frit porosities are only nominal, and do not reflect the maximum pore size of a frit. Check the frit selection chart for help in choosing the right frit for your application.

SS Frits – PEEK-Encased

Tolerances: ± 0.05 mm (.002")
All sold 5 to a package

Ring OD	Frit OD	Thickness	Porosity	Volume	Product No.
3 mm (0.118")	0.97 mm (0.038")	.70 mm (.028")	0.5 µm	0.14 µl	JR-1110-05P-5
		.70 mm (.028")	2 µm	0.18 µl	JR-1110-2P-5
		.70 mm (.028")	5 µm	0.2 µl	JR-1110-5P-5
	1.96 mm (0.077")	.70 mm (.028")	0.5 µm	0.56 µl	JR-1111-05P-5
		.70 mm (.028")	2 µm	0.75 µl	JR-1111-2P-5
		.70 mm (.028")	5 µm	0.81 µl	JR-1111-5P-5
1/4" (6.35 mm)	2.00 mm (0.078")	1.59 mm (.062")	0.5 µm	1.26 µl	JR-1104-05P-5
	2.00 mm (0.078")	1.59 mm (.062")	2 µm	1.7 µl	JR-1104-2P-5
	3.20 mm (0.125")	1.59 mm (.062")	0.5 µm	3.24 µl	JR-1102-05P-5
	3.20 mm (0.125")	1.59 mm (.062")	2 µm	4.36 µl	JR-1102-2P-5
	3.90 mm (0.153")	1.59 mm (.062")	0.5 µm	4.86 µl	JR-1101-05P-5
	3.90 mm (0.153")	1.59 mm (.062")	2 µm	6.54 µl	JR-1101-2P-5
	4.60 mm (0.181")	0.80 mm (.032")	0.5 µm	3.51 µl	JR-1103-05P-5
		0.80 mm (.032")	2 µm	4.72 µl	JR-1103-2P-5
		1.59 mm (.062")	0.5 µm	6.8 µl	JR-1100-05P-5
		1.59 mm (.062")	2 µm	9.15 µl	JR-1100-2P-5

Other dimensions and porosities are available on request. Minimum order 100 pieces.

Home | Products | Search | Contact VICI Jour | About VICI Jour