Safety-Coated Glass Bottles

safety coated glass bottles
  • Special design for helium sparging of LC mobile phases
  • Safety coating to minimize risk of injury
  • Available in 0.25, 0.5, 1 and 2 L sizes

These glass bottles with GL45 screw threading are made of chemical resistant Borosilicate 3.3 and are coated on the outside with a layer of sturdy polymer, decreasing the chances of breakage if the bottle is dropped. Even if the bottle breaks, glass fragments will be kept within the polymer coating. Solvents will be kept within the coating for a short while. The coating also protects solvents against UV light up to 385 nm.

These safety-coated glass bottles cannot be autoclaved.

Bottles include a solid cap.

Bottle size Product No.
0.25 L JR-9000-0011
0.5 L JR-9000-0012
1 L JR-9000-0005
2 L JR-9000-0010

SPECIFICATIONS

  • Materials:
    Bottle Borosilicate 3.3 glass
    Cap Polypropylene
    Pouring ring Polypropylene
  • Pressure rating:
    0.8 bar (11.6 psi)

SEE ALSO

NOTES

  • The bottles are not suitable to be stressed with pressures above 0.8 bar (11.6 psi), but only for continuous helium sparging.
  • The safety coating is not intended to replace safe working conditions and precautions in laboratories.