Pre-Cut Stainless Steel Tubing

  • For zero dead volume connections
  • Cleaned and ready to use
  • Soft annealed OD for easy ferrule connections
  • Color bands for quick identification

VICI Jour offers pre-cut 1/16" stainless steel tubing in lengths more commonly required in HPLC systems. These tubes are cut to square, burr-free ends for zero dead volume connections. Colored bands allow quick ID identification.

VICI pre-cut tubing is specially steam cleaned to remove both organic and inorganic contaminants. Softener-free PE caps are used to prevent any contamination during shipment and storage.

pre-cut stainless tubing
OD ID (mm) Color Length (mm) Product No.
1/32" 0.050 Blue 50 JR-T-91005
100 JR-T-91100
130 JR-T-91130
180 JR-T-91180
200 JR-T-91200
300 JR-T-91300
0.070 Black 50 JR-T-92005
100 JR-T-92100
130 JR-T-92130
180 JR-T-92180
200 JR-T-92200
300 JR-T-92300
1/16" 0.13 Red 50 JR-T-97005
100 JR-T-97010
130 JR-T-97012
180 JR-T-97013
200 JR-T-97015
300 JR-T-97020
0.18 Yellow 50 JR-T-97025
100 JR-T-97030
130 JR-T-97032
180 JR-T-97033
200 JR-T-97035
300 JR-T-97040
0.25 Blue 50 JR-T-97045
100 JR-T-97055
130 JR-T-97057
180 JR-T-97058
200 JR-T-97060
300 JR-T-97065
0.50 Orange 50 JR-T-97075
100 JR-T-97080
130 JR-T-97082
180 JR-T-97083
200 JR-T-97085
300 JR-T-97090
0.75 Green 50 JR-T-97095
100 JR-T-97100
130 JR-T-97102
180 JR-T-97103
200 JR-T-97105
300 JR-T-97110

SPECIFICATIONS

  • Pressure rating varies with ID; minimum is 365 bar (5300 psi)
  • Tolerances
    OD ±0.05mm (.002")
    ID ±0.025mm (.001")

MORE INFORMATION

SEE ALSO